The F5.59i system comprises F5 stainless steel wall brackets, vertical aluminium Y support profiles and panel slides. Specially shaped coffered facades made of metal or aluminium composite panels are simply hooked into these.
The single bolt slide can be screwed to the profile in any position and also released, thanks to the screwed "rotary claw connection" (patent-pending). This means that only one screw is required, and the coffered facade may be adjusted at any time.
F5 stainless steel wall brackets offer lasting advantages: their low thermal conductivity reduces heat loss to a minimum. This ensures stringent energy requirements for building envelopes are complied with ‒ to Passive Haus standards.
The brackets and horizontal and vertical profiles are connected using screws, with fixed and sliding connections to guarantee free expansion. The wall bracket design holds the vertical profiles in place whilst fixing, without the requirement for additional tools, speeding up the installation.
The wall brackets are available in lengths from 100 mm to 320 mm and supplied with thermal insulators. The system is suitable for all types of fastening and will compensate for up to 40 mm of unevenness along the length.
- Bracket F5
- Spring clamp
- Insulator pad
- Plastic frame anchor with screw
- Self drilling screw
- Bolt clip
- Static calculation
- Assembly planning
- Project management
- U-Value calculation
- Optimized cuts and special parts