The F3.41 system comprises patented F3 wall brackets, vertical support profiles, horizontal supporting hanger profiles and hangers. These are easily mounted on the back of the panel. The panels are then hooked into the heavy-duty supporting hanger profile by means of undercut anchors, height-adjusted and fastened.
The F3 wall brackets are fastened to individual storey ceilings and the profiles run from upper to lower storey ceiling. This allows large spans of the support profiles. And since fewer brackets are needed, thermal bridging is also reduced. It is specifically designed for heavy, large-format facade elements.
The brackets and horizontal and vertical profiles are connected using screws, with fixed and sliding connections to guarantee free expansion
The wall bracket design holds the vertical profiles in place whilst fixing, without the requirement for additional tools, speeding up the installation.
The system is available for wall spacings from 95 mm to 285 mm and can be supplied with an optional insulator to reduce thermal bridging.
- Bracket F3
- Insulator pad
- Rectangular tube
- Plastic frame anchor with screw
- Self drilling screw
- Hexagon head screw
- C-hanger system
- Undercutting anchor with screw
- Static calculation
- Assembly planning
- Project management
- U-Value calculation
- Optimized cuts and special parts