The F3.29 system comprises patented F3 wall brackets, vertical profiles, horizontal support profiles and panel supports. The panels are simply clipped into the horizontal support profile by means of panel holders.
The F3 wall brackets are fastened to individual storey ceilings and the profiles run from upper to lower storey ceiling. This allows large spans of the support profiles. And since fewer brackets are needed, thermal bridging is also reduced.
The brackets and horizontal and vertical profiles are connected using screws, with fixed and sliding connections to guarantee free expansion
The wall bracket design holds the vertical profiles in place whilst fixing, without the requirement for additional tools, speeding up the installation.
The system is available for wall spacings from 95 mm to 285 mm and can be supplied with an optional insulator to reduce thermal bridging.
- Bracket F3
- Insulator pad
- Rectangular tube
- Plastic frame anchor with screw
- Self drilling screw
- Carrier profile for terracotta system
- Bottom- / Standard- / Top–clip
- Silicone gasket
- Static calculation
- Assembly planning
- Project management
- U-Value calculation
- Optimized cuts and special parts