The F3.23 system comprises patented F3 wall brackets, vertical support profiles and horizontal panel support profiles. Prefabricated facade panels with milled grooves on two edges are hung into the horizontal support profile and fastened using an additional support profile.
The F3 wall brackets are fastened to individual storey ceilings and the profiles run from upper to lower storey ceiling. This allows large spans of the support profiles. And since fewer brackets are needed, thermal bridging is also reduced.
The brackets and horizontal and vertical profiles are connected using screws, with fixed and sliding connections to guarantee free expansion
The wall bracket design holds the vertical profiles in place whilst fixing, without the requirement for additional tools, speeding up the installation.
The system is available for wall spacings from 95 mm to 285 mm and can be supplied with an optional insulator to reduce thermal bridging.
- Bracket F3
- Insulator pad
- Rectangular tube
- Plastic frame anchor with screw
- Self drilling screw
- Static calculation
- Assembly planning
- Project management
- U-Value calculation
- Optimized cuts and special parts